| 1 |
1.
Santhosha, M., Lokesh, K.S., Manjunatha, G.M. et al. ANN-driven Modelling of Deformation and Notch Sensitivity in Hemp Fiber�Epoxy Composites Under Tensile and Edge-notched Tensile Loading Conditions. J. Inst. Eng. India Ser. D (2026). https://doi.org/10.1007/s40033-026-01042-9
2.
Lokesh, K. S., Mayya, D. S., Venkatesh, K. C., Sharath Chandra, H. S., Santhosh Kumar, T. C., Mithuna, H. R., & Kshama, H. (2026). Mechanical characterization and fatigue behaviour of carbon/flax/sisal hybrid fiber reinforced epoxy composites. Journal of Materials Research and Technology. Advance online publication. https://doi.org/10.1016/j.jmrt.2026.06.135
3.
Shetty, S., Lokesh, K. S., & Pushpalatha, K. (2026). Machine learning-integrated private blockchain framework for bias detection in clinical trials data. Array, 29, Article 101002. https://doi.org/10.1016/j.array.2026.101002
4.
Mukanavar, S.I., Mayya, D.S., Lokesh, K.S. et al. Evaluating the Density, Water Absorption and Compressive Behavior of Silica Sand/Aluminium Trihydrate Based Epoxy Composites. J. Inst. Eng. India Ser. D (2026). https://doi.org/10.1007/s40033-026-01011-2
5.
Anekallu, S., Mayya, D.S. & Lokesh, K. S, The Hub and Spokes Agile Wheel Model: A Scalable Framework for Building Responsiveness in Resource-Constrained MSSIs. J. Inst. Eng. India Ser. C 107, 905�915 (2026). https://doi.org/10.1007/s40032-026-01322-z
6.
Mukanavar, S.I., Mayya, D.S. & Lokesh, K.S. Mechanical Characterization of Silica Sand and Aluminium Trihydrate Based Epoxy Hybrid Composite Using Cabosil/Glass Bead and Zinc Stearate Powder as Secondary Reinforcement. J. Inst. Eng. India Ser. D (2026). https://doi.org/10.1007/s40033-026-00991-5
7.
Lokesh K.S, Shrinivasa Mayya.D, Ravindra Babu.G, Govindaraju H, Keerthana B. Chigateri, Rashmi M.R, Investigating the material chemistry and performance evaluation of ZnO-based hybrid carbon fiber/waste silk reinforced polymer nanocomposites, Next Materials (Q1), Elsevier, Volume 10, 2026, 101569, ISSN 2949-8228, https://doi.org/10.1016/j.nxmate.2025.101569
8.
Lokesh K�S�, Shrinivasa Mayya D�, Shailesh Shetty S�, Venkatesh K�C�, Ravindra Babu G�, Govindaraju H�, Yashwanth H�L�, Thermo-mechanical performance of Kevlar based hybrid natural fiber composites pre-coated with termite modified epoxy polymer, Results in Engineering(Q1), Elsevier, Volume 28,2025,107719, ISSN 2590-1230, https://doi.org/10.1016/j.rineng.2025.107719
9.
Lokesh, K. S., Ramachandra, C. G., Kumar, T. P., Kanti, P. K., Paramasivam, P., & Ayanie, A. G. (2025). Effect of bonding characteristics of major constituents of mineral filler-based glass fiber reinforced with epoxy composites. Scientific Reports(Q1), Nature, 15(1), 4354. https://doi.org/10.1038/s41598-025-04354-0
10.
Lokesh K S, Shrinivasa Mayya D, Santhosh Kumar T C, Somaiah K S, Sharath Chandra H S, Varun Kumar K R, Sneha, Pavan Kumar P M, Experimental and regression analysis of chicken feather-based chopped glass fibre mat hybrid composites, Results in Engineering(Q1), Elsevier, Volume 26,2025,104964, ISSN 2590-1230, https://doi.org/10.1016/j.rineng.2025.104964
11.
Lokesh, K. S., Mayya, D. S., Yashwanth, H. L., Sharanya, I. S., Nikam, H., & Keshava Reddy, K. L. (2025). Evaluation of mechanical, acoustic and vibration characteristics of Calamus rotang-based hybrid natural fiber composites. Results in Engineering(Q1), Elsevier, 25, 104475. https://doi.org/10.1016/j.rineng.2025.104475
12.
Anekallu, S., Mayya, D.S. & Lokesh, K.S The Hub and Spokes Agile Wheel Model: A Scalable Framework for Building Responsiveness in Resource-Constrained MSSIs. J. Inst. Eng. India Ser. C (Q2) (2026). Springer, https://doi.org/10.1007/s40032-026-01322-z
13.
Mukanavar, S.I., Mayya, D.S. & Lokesh, K.S. Mechanical Characterization of Silica Sand and Aluminium Trihydrate Based Epoxy Hybrid Composite Using Cabosil/Glass Bead and Zinc Stearate Powder as Secondary Reinforcement. J. Inst. Eng. India Ser. D (Q2) (2026). Springer, https://doi.org/10.1007/s40033-026-00991-5
14.
Rao, G., Lokesh, K. S., Channa Keshava Reddy, K. L., Nikam, H., Sharanya, I. S., & Yashwanth, H. L. (2025). Experimental and simulation analysis of influence of stacking sequence on tensile and abrasion resistance of E-glass/jute fiber-based hybrid composites. AIP Conference Proceedings, 3299(1), 050012. https://doi.org/10.1063/5.0279611
15.
Lokesh, K. S., Mayya, D. S., Bhoomika, A. D., Appattillath, M. M., Prathyush, T. V., & Rashmitha, S. R. (2025). Comparative study on structural property evaluation of PVC plates with recycled PVC/polythene materials. AIP Conference Proceedings, 3299(1), 00007. https://doi.org/10.1063/5.0044356
16.
Ramachandra, C.G., Nagesh, S.N., Lokesh, K.S., Baig, R.U., Prashanth Pai, M. (2026). Application of Shot Blasting on Bronze Alloy to Enhance Surface Integrity. In: Liem, N.Q. (eds) Proceedings of the 4th International Conference on Materials Engineering and Functional Materials. ICMFM 2025. Springer Proceedings in Materials, vol 88. Springer, Singapore. https://doi.org/10.1007/978-981-95-0445-9_2
17.
Lokesh, K. S., Mayya, D. S., Raghavendra, B. M., Puneeth, S., Venkatesh Rao, S. N., & Shravankumar Sharma, P. (2025). Influence of mineral filler on preparation and types of loading conditions of fiber reinforced plastics. AIP Conference Proceedings, 3299(1), 050008. https://doi.org/10.1063/5.0279612
18.
Lokesh, K. S., Vishwas, S., Mayya, S. D., Kumar, N. J. R., Shree, M. M., Hayyan, M., Pratheeksha, C., & Shreya, S. (2025). Carbon dioxide gas sensing by synthesized rGO-based aluminium oxide nanocomposite. Journal of Physics: Conference Series, 3151(1), 012003. https://doi.org/10.1088/1742-6596/3151/1/012003.
19.
Lokesh, K. S., Vishwas, S., Rao, G., Kumar, N. J. R., Asma, Janani, S., Nayak, L. S., & Shruthi, G. (2025). Synthesis of aluminium oxide nanoparticles by Mimosa pudica plant extract. Journal of Physics: Conference Series, 3151, 012010. https://doi.org/10.1088/1742-6596/3151/1/012010
20.
Joshuva, N., Mayya, S. D., Lokesh, K. S., Hithashri, Harshitha, T., & Sujith. (2025). Characterization and thermal analysis of natural composite fiber. Journal of Physics: Conference Series, 3151(1), 012005. https://doi.org/10.1088/1742-6596/3151/1/012005
21.
Lokesh, K. S., Mayya, S. D., Joshuva, N., Kumara, V. N., Jagadeesh, B., & Sudheendra, H. N. (2025). Study on acoustic characteristics of waste chicken feather as secondary reinforcement in CSM/epoxy composites. Journal of Physics: Conference Series, 3151(1), 012008. https://doi.org/10.1088/1742-6596/3151/1/012008
22.
Lokesh, K. S., Jagadeesh, B., Bhat, A., Chougale, A. D., Doddamani, B. A., & Vijay, T. R. (2025). Effect of temperature on mechanical properties of E-glass fibre reinforced epoxy composites. Journal of Physics: Conference Series, 3151(1), 012009. https://doi.org/10.1088/1742-6596/3151/1/012009
23.
Joshuva, N., Mayya, S. D., Lokesh, K. S., Farzan, A., Raj, A., & Sathwik. (2025). Optimization of wear properties and mechanical properties of natural composite fibers using Taguchi analysis. Journal of Physics: Conference Series, 3151(1), 012006. https://doi.org/10.1088/1742-6596/3151/1/012006
24.
Lokesh, K. S., Mayya, D. S., Shanmugam, B. K., Kumar, J. R. N., Puneeth, S., & Raghavendra, B. M. (2023). Experimental and regression analysis on impact behaviour of the thermally aged wollastonite filled e-glass fibre reinforced epoxy composite. Journal of The Institution of Engineers (India): Series D(Q2), Springer, 105(3), 1609�1617. https://doi.org/10.1007/s40033-023-00580-w
25.
Lokesh, K. S., Kumar, K. S., Keerthan, N., Revanth, R., Sandeep, S., Lakkundi, S. B., Bharath, V., Hanumanthappa, H., Durga, P. C., & Shanmugam, B. K. (2024). Experimental analysis of the rice husk and eggshell powder-based natural fibre composite. Journal of The Institution of Engineers (India): Series D(Q2), Springer,105(3), 1801�1808. https://doi.org/10.1007/s40033-023-00557-9
26.
Neelappa, D. R., Keerikadu, S., & Lokesh, K. S. (2024). Acoustic and thermal analysis of composite fibre boards fabricated using areca catechu & areca husk fibers. Journal of The Institution of Engineers (India): Series D(Q2), Springer, https://doi.org/10.1007/s40033-024-00775-9
27.
J R, N. K., D, S. M., Praveen, B. M., K S, L., & P., P. (2023). Carbon dioxide sensing using a PEI-Cr2O3-rGO nanocomposite sensor with patterned copper clad as a substrate. Materials Research Innovations, 28(3), 191�205. Taylor and Francis https://doi.org/10.1080/14328917.2023.2250634
28.
Lokesh, K. S., Pinto, T., Mayya, D. S., Ramachandra, C. G., Kumar, J. R. N., & Pai, R. (2024). Preparation and examination of impact resistance of thermally aged mineral filler loaded composites. Journal of The Institution of Engineers (India): Series D(Q2), Springer, 105(3), 58. https://doi.org/10.1007/s40033-024-00669-w
29.
Ramachandra, C. G., Lokesh, K. S., Mayya, D. S., Shwetha, K. P., Mantero, D. D., Hemanth, S., Akhilesh, & Kumar, K. S. (2024). Experimental study on effect of coconut leaf spathe on mechanical properties of chopped glass fibre reinforced with thermoset composites. In Proceedings of the International Conference on Eco-friendly Fibers and Polymeric Materials (pp. 815�828). Springer. https://doi.org/10.1007/978-981-97-7071-7_54
30.
Ramamurthy, L. K. S., Raghavaiah, D. J., Kukkala, K., Nagendra, R. B., & Somshekar, Y. A. (2024). Developing natural fiber-based hybrid composite aircraft structure by utilizing single used waste plastic as mould through 3-D printing technique. AIP Conference Proceedings, 3060(1), 020004. https://doi.org/10.1063/5.0143963
31.
Lokesh, K. S., Mayya, D. S., Yashwanth, H. L., Sharanya, I. S., Nikam, H., Reddy, K. L. C., & Kumar, S. (2024). Mechanical characterization & regression analysis of Calamus rotang based hybrid natural fibre composite with findings reported on retrieval bending strength. Scientific Reports(Q1), Nature, 14, 3943. https://doi.org/10.1038/s41598-024-53570-7
32.
Mayya, D. S., Lokesh, K. S., Ramachandra, C. G., Reddy, K. L. C., Nikam, H., Sharanya, I. S., Yashwanth, H. L., & Pai, R. (2024). Characterization and mechanical studies of reduced graphene oxide filled glass fabric thermosets. In Smart Materials and Manufacturing Technologies for Sustainable Development (pp. 23�28). Springer. https://doi.org/10.1007/978-3-031-63909-8_4
33.
Neelappa, D. R., Keerikadu, S., & Ramamurthy, L. K. S. (2023). Fabrication and characterization of bio composite fiber boards from areca leaf sheaths. Journal of Materials and Manufacturing Processes, 38(3), 1�10. https://doi.org/10.1080/10426914.2023.2161234
34.
Mohan Kumar, S., Govindaraju, H. K., Kiran, M. D., & Lokesh, K. S. (2023). Mechanical characterization and microstructure study of Al-Zn alloy processed by equal channel angular pressing combined with heat treatment. Advances in Materials and Processing Technologies, 10(4) (Q2), 1�12. Taylor and Francis, https://doi.org/10.1080/2374068X.2023.2184573
35.
Pai, R., Lokesh, K. S., Mayya, D. S., Vidyashree, H. G., Yallappa, R. K., Jayashree, J., Neha, K. U., & Sagar, K. K. (2023). Analysis of design parameters of fuel injector used in liquid propellant rocket engine. Materials Today: Proceedings, Elsevier 92, 344�355.
36.
Kurubar, D. M., Beluraih, D. D., Ramamurthy, L. K. S., Afzal, A., Baig, M. A. A., & Srikanth, G. (2024). 3-D printed sounding rocket for the application of cloud seeding. AIP Conference Proceedings. https://doi.org/10.1063/5.0143963.
37.
Sharath Chandra, H. S., Lokesh, K. S., & Ravindra Babu, G. (2024). Impact of fibre orientation on mechanical properties of GFRP composites. Materials Today: Proceedings, Elsevier 72, 1024�1031. https://doi.org/10.1016/j.matpr.2023.11.123
38.
Lokesh, K. S., Pinto, T., Mayya, D. S., Shanmugam, B. K., Panduranga, B. P., Hanumanthappa, H., & Mohanraj, G. T. (2024). Evaluation of the wear behaviour of thermally aged E-glass reinforced epoxy composite filled with wollastonite using Taguchi L27 technique. Journal of The Institution of Engineers (India): Series D(Q2), Springer, https://doi.org/10.1007/s40033-024-00788-4
39.
Lokesh, K. S., Pinto, T., Mayya, D. S., Shanmugam, B. K., Panduranga, B. P., Hanumanthappa, H., & Mohanraj, G. T. (2022). Effect of wollastonite filler on the experimental and microstructural analysis of epoxy composite reinforced with E-glass fibre. Journal of The Institution of Engineers (India): Series D(Q2), 103(2), 489�496.Springer, https://doi.org/10.1007/s40033-022-00347-9
40.
Sriramamurthy, L. K., Shanmugam, B. K., Kumar, T. P., Hanumanthappa, H., Thimmegowda, M., Mayya, S. D., Yashaswini, K. S., & Kumar, A. B. K. (2022). Experimental and statistical evaluation of the mechanical performance of (Jute and Cocopeat) plant and (Silk) animal-based hybrid fibers reinforced with epoxy polymers. Journal of Natural Fibers(Q1), 19(16), 1�12. https://doi.org/10.1080/15440478.2022.2073501
41.
Lokesh, K. S., Shanmugam, B. K., Mayya, D. S., Panduranga, B. P., Kumar, J. R. N., & Hanumanthappa, H. (2021). Experimentation and prediction analysis on the mechanical performance of fish scale and coconut shell powder-based composites. Journal of Natural Fibers(Q1), 19(14), 7750�7761. https://doi.org/10.1080/15440478.2021.1958410
42.
Kumar, J. R., Prasad, P., Savitha, M. B., Lokesh, K. S., Shanmugam, B. K., Gowda, N. N., & Rohith, H. V. (2021). CO2 detection: Using the polyethyleneimine�cerium oxide nanocomposite sensing film coated on interdigitated electrode prepared from copper clad. Materials Research Innovations, Taylor and Francis 25(6), 363�373. https://doi.org/10.1080/14328917.2020.1864943
43.
Pai, R., Bangarappa, L., Lokesh, K. S., Mayya, D. S., Naveen, C. R., & Pinto, T. (2022). Hybridization effect on water absorption and flexural properties of E-glass/banana fibre/epoxy composites. Materials Today: Proceedings, Elsevier 52, 1841�1845. https://doi.org/10.1016/j.matpr.2021.11.491
44.
Kumar, J. R., Prasad, P., Hebbar, N., Savitha, M. B., Lokesh, K. S., & Gowda, N. N. (2021). A potential application of polyethyleneimine�reduced graphene oxide nanocomposite sensing film coated on interdigitated electrode prepared from copper-clad for carbon dioxide detection. Materials Research Innovations, Taylor and Francis, 25(6), 363�371. https://doi.org/10.1080/14328917.2020.1826674
45.
Pai, K. R., Lokesh, K. S., Mayya, D. S., Kumar, J. R. N., & Hebbale, A. M. (2021). Experimental study on preparation and mechanical characteristics of jute/silk/coco-peat reinforced with epoxy polymers. Materials Today: Proceedings, Elsevier, 46(7), 2764�2769. https://doi.org/10.1016/j.matpr.2021.02.511
46.
Kumar, N., Lokesh, K. S., Kannantha, V., Pai, R., & Hebbale, A. M. (2021). Development and experimental investigation of mechanical properties of graphene-based aluminum 6061 alloys. Materials Today: Proceedings, Elsevier 46(1), 2421�2424. https://doi.org/10.1016/j.matpr.2021.01.303
47.
Pai, R. K., Lokesh, K. S., Veeresh, R. K., & Somayaji, N. A. (2020). Investigation on performance of DC motor in exhaust application using vibration-based condition monitoring. PalArch�s Journal of Archaeology of Egypt/Egyptology, 17(9), 1278�1285. https://archives.palarch.nl/index.php/jae/article/view/3750
48.
Lokesh, K. S., Kumar, J. R. N., Kannantha, V., & Sampreeth, U. (2020). Experimental evaluation of substrate and annealing conditions on ZnO thin films prepared by sol-gel method. Materials Today: Proceedings, 24(2), 201�208. Elsevier, https://doi.org/10.1016/j.matpr.2020.04.268
49.
Pai, R., Kannantha, V., Ramegowda, N. K. J., & Sriramamurthy, L. K. (2019). First pass yield improvement in fuel injection pump delivery valve assembly. International Journal of Engineering & Technology, 8(2), 1�5. https://doi.org/10.14419/ijet.v8i2.12968
50.
Sri Ramamurthy, L. K., Hunasikatti, S., Ramegowda, N. K. J., Kannantha, V., & Pai, R. (2019). Effect of E-waste rubber on mechanical behavior of glass fiber reinforced with epoxy composites. AIP Conference Proceedings, 2080(1), 020003. https://doi.org/10.1063/1.5092886
51.
Shetty, S. P., Babu, P., Achar, K. G., Lobo, S. J., & Lokesh, K. S. (2019). Research on combination of swing wing with canard and tail used in fighter aircraft. International Journal of Recent Technology and Engineering (IJRTE), 8(2S3), 1�5.
52.
Lokesh, K. S, Mayya, D. S., & (2018). Effect of bio-filler on tensile and compressive behavior of bidirectional E-glass reinforced with epoxy plastics. International Journal of Engineering Research and Technology (IJERT), 7(6), 1�5. Retrieved from https://www.researchgate.net/publication/354371856
53.
Lokesh, K. S., Ummaji, B., Gururaj, P., Rayappa, K., & Yashavantha, J. (2018). Effect of red mud particles on scratch resistance of aluminum-based metal matrix composites. American Journal of Aerospace Engineering, 5(1), 24�29. https://doi.org/10.11648/j.ajae.20180501.14
54.
Lokesh, K. S., Chethan, I. C., Naveen Kumar, K. R., Kannantha, V., & Naveen Kumar, J. R. (2018). Determination of compressive strength of graphene reinforced with aluminium-7075 metal matrix composites. International Journal of Mechanical Engineering and Technology, 9(1), 327�335. Retrieved from https://iaeme.com/Home/article_id/IJMET_09_01_035
55.
Izzudheen, I., Varghese, J., Tomy, J., Rizwan, M., & Lokesh, K. S. (2016). Fabrication of semi-automatic feeding mechanism for small scale poultry farm. International Journal of Mechanical and Aeronautical Engineering, 1(1), 1�5.
56.
Lokesh, K. S. D. T., Kumar, S. B., & Ramachandra, C. G. (2014). Effect of E-waste filler on tensile and flexural behavior of E-glass/epoxy composites. International Journal of Engineering Trends and Technology, 2(5), 184�188.
57.
Girish, A. R., Sandyal, P., Lokesh, K. S., & Varun, N. (2016). Review on experimental analysis of pulse detonation engine and its merits. International Journal of Engineering Trends and Technology, 2(5), 144�148.
58.
Girish, A. R., Sandyal, P., Lokesh, K. S., & Varun, N. (2016). CFD simulation of centrifugal blower using ANSYS CFX. International Journal of Engineering Trends and Technology, 2(5), 144�148.
|
